Technical Specification Engine |
||
|---|---|---|
| Type | Water/oil-cooled 4-cylinder 4-stroke in-line engine, four valves per cylinder, two overhead camshafts | |
| Displacement | 999 ccm | |
| Bore x Stroke | 80 mm x 49.7 mm | |
| Compression ratio | 12.0:1 | |
| Torque&Power | 112 Nm at 9,250 rpm / 118 kW (160 hp) at 11,000 rpm | |
| Fuel injection | Electronic injection | |
| Exhaust | Closed-loop 3-way catalytic converters, with interference pipe | |
Transmission |
||
| Gearbox | Constant-mesh 6-speed gearbox, straight-toothed | |
| Primary drive | Chain 17/45 | |
| Final drive | Chain 17/45 | |
| Clutch | Multiplate clutch in oil bath, anti-hopping clutch, mechanically controlled | |
Chassis |
||
| Frame | Aluminium composite bridge frame, partially self-supporting engine | |
| Front suspension | Upside-down telescopic fork Ø 46 mm, compression and rebound stage adjustable | |
| Front wheel | Cast aluminium wheels, 3.50 x 17 | |
| Front Tyre | 120/70 ZR 17 | |
| Rear suspension | Aluminium 2-sided swing arm, rebound damping adjustable | |
| Rear wheel | Cast aluminium wheels, 6.00 x 17″ | |
| Rear tyre | 190/55 ZR 17 | |
| Front wheel travel | 150mm | |
| Rear wheel travel | 140mm | |
| Front brake | Twin disc brake, floating brake calipers, radial 4-piston fixed caliper, diameter 320 mm | |
| Rear brake | Single disc brake, 2- piston floating caliper, diameter 265 mm | |
| ABS | BMW Motorrad Race ABS (part-integral), disengageable | |
Dimensions and weight |
||
| Dry weight |
208 kg
|
|
| Wet weight (KERB) |
228 kg
|
|
| Seat height | 840 mm | |
| Wheelbase | 1548 mm | |
|
64,5° | |
| Castor |
|
|
| Fuel tank capacity | 20l | |
| Number of seats | Dual seat | |
Equipments |
||
| Standard Equipment |
Riding Modes, ACS, DTC, Shift Assist, Cruise Control
|
|
Warranty |
||
| Warranty |
24 months unlimited mileage
|
|
| Maintenance service intervals | 15.000km (7.500m)/12 Months | |
| Valve clearance check | 18,000m/30.000KM | |
Emissions and Consumption |
||
| Standard |
Euro 3
|
|
